SPIN SINGLE vs SPIN PRO — Which Rotating Bed Should You Choose?
Once you've decided a rotating bed is the answer, the next question is almost always: which one?
At AIDASTRA, that usually means choosing between the SPIN SINGLE and the SPIN PRO — the two rotating beds we build. The spec sheets make them look similar — both rotate 90 degrees, both use German Dewert motors. But they're built for different jobs, and the choice matters more than the numbers suggest.
Here are the questions we hear most, and the honest answers.
Q: What's actually different between the two beds?
Strip away the marketing and there are two real differences.
First, the lift. The SPIN PRO has a fully electric height adjustment — the whole bed goes up and down at the press of a button. The SPIN SINGLE's height is adjustable too, but it's a manual assist. That's the single biggest functional gap between the two.
Second, the build. The SPIN PRO uses two motors — one for rotation, one for lift — and is rated for heavier, more continuous use. The SPIN SINGLE is built around a single rotation motor, with a lighter-duty frame and a lower load rating.
Everything else — rotation angle, safety systems, wood finishes, the way it feels to use — is essentially the same.
Q: Which one is right for a senior living at home?
The SPIN SINGLE. It's the rotating bed for elderly people living at home — designed for independent living.
A senior uses it alone, presses the button, gets up. The manual height assist is fine because the user isn't adjusting height often — they're setting it once and leaving it. And if a family member is there to assist with transfers a few times a day, the SINGLE still covers it comfortably.
Budget matters here too. The SINGLE is our home-oriented model, priced for a family purchase rather than an institutional budget line.
Q: Which one should a nursing home or facility choose?
The SPIN PRO — almost without exception.
In a nursing home or rehab center, caregivers change every shift. As a rotating home care bed manufacturer, this is where we point facilities first: electric height adjustment means each caregiver can set the bed to their working height in seconds — no reaching down, no bending over.
When your rotating nursing bed is handling frequent, staff-assisted transfers, the PRO is built for the heavier cycle of institutional use. Two motors doing separate jobs means neither is overworked.
Q: Can the SPIN SINGLE handle heavier residents?
Not above its rating. The SINGLE is capped at 150kg (330lbs) — that's the hard limit.
The SPIN PRO is rated to 180kg (400lbs). If your situation involves a heavier person, capacity isn't negotiable; the PRO is the one that covers it.
Q: Why does electric height adjustment matter so much?
Because of who does the lifting.
At home, you set the height once and leave it. In a facility, the bed height changes every transfer, every shift, every resident. That's exactly where caregiver backs get hurt — and electric hi-lo is the single best thing a facility can do to protect them.
If the height changes often, you need an electric rotating bed with a powered lift — that's the PRO. If a family member just checks in a few times a day, the SINGLE is plenty.
Q: Is the SPIN PRO worth the extra cost?
If it's going into a facility: yes. The electric lift is the feature that pays for itself in reduced staff injuries and faster, safer transfers.
If it's for one independent senior at home: usually not. The PRO works fine, but for that situation it's overkill.
Q: Still torn? Two questions that settle it.
1. How often will the bed height change?
At home, you set it once. In a facility, it changes constantly. Frequent height changes mean you need the electric lift — that's the PRO.
2. How much does the caregiver lift and bend?
If the user is mostly independent and someone just checks in, the SINGLE is plenty. If staff are doing multiple assisted transfers a day and their backs are a concern, the PRO's electric lift is the feature that pays for itself.
The Side-by-Side, in One Table
|
Situation |
SPIN SINGLE |
SPIN PRO |
|
Independent senior at home |
✅ Best fit |
✅ Works, but overkill |
|
Family caregiver, home setting |
✅ Good |
✅ Works |
|
Nursing home, multiple shifts |
⚠️ Possible, but manual lift slows staff |
✅ Best fit |
|
Rehab center, frequent assisted transfers |
⚠️ Possible |
✅ Best fit |
|
Heavier residents (150kg+) |
❌ Over capacity |
✅ Handles it |
|
Caregiver back-pain reduction program |
⚠️ Partial |
✅ Full electric lift |
The Bottom Line
The SPIN SINGLE and SPIN PRO aren't competing for the same buyer. One is a home care tool built for independent living. The other is an institutional workhorse built for continuous, staff-assisted use. Both come out of the same rotating nursing bed factory, with the same German Dewert motors and the same safety systems — the difference is who they're built for.
Choose the SINGLE for a home, for one person, on a family budget. Choose the PRO for a facility, for frequent transfers, when electric lift matters.
And if you're genuinely between the two — a family with heavy lifting needs, a small facility that wants the best of both — that's a conversation worth having. Get in touch and we'll walk through your situation.
Related Reading
→ SPIN SINGLE — Rotating Bed for Independent Living
→ SPIN PRO — High-Low Rotating Bed for Institutions
→ FAQ: What Is a Rotating Bed?
